ESAB Caddy MIG C160i Welder

ESAB Caddy MIG C160i Welder

£858.00
Availability: In Stock
Ex Tax: £715.00
Brand:ESAB
Product Code: 0349310850
+


Caddy C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work.  This easy to use and  powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.

Offering true portability, Not only is Caddy Mig C160i small and of low weight. Thanks to its intelligent, compact design it is easy to take along to different indoor and outdoor worksites and also to tuck away when not used, making it handy both in the workshop and on the move. Torch fastening and built-in grooves for cables facilitate transportation. Polarity change enables usage of gasless cored (self-shield) wire, making the welder independent of gas tubes as well as wind conditions.

 
Single phase mains connection makes it easy to find an electricity supply for the unit, and it works equally well when powered by a portable generator. 

 
Thanks to the built-in PFC circuit, Caddy Mig C160i can operate with extra long mains cables, over 100 m, giving the welder a very large working radius.
 Impact resistant design Composite materials in combination with smart design solutions provide a durable and impact resistant machine, adapted to rough conditions. The control panel is recessed, which provides additional protection and durability.
 Improving the weld quality Set material thickness and start welding. With Caddy Mig C160i you only need to set the plate thickness. The machine controls the rest and can be trusted to always help the welder achieve consistent, high quality welding results. Hotter or colder welds can easily be obtained by adjusting the knob.

Applications:
• Repair, maintenance or assembly work 
• Agricultural applications
• Auto-repair
• Light metal fabrication
• Transport
• Education
• Household and furniture
• Tack welding 
• Use with an automatic voltage regulated generator.

Can weld sheet thicknesses 0.5mm - 4.0mm

Machine comes complete with :-

3 m MXL180 torch
  • 3 m mains cable with plug.
  • 4.5 m gas hose with hose clamp and quick connector return cable with clamp.
  • 1 kg OK Autrod 12.51, 0.8 mm MIG Wire

  •  
    External dimensions, LxWxH, mm449x198x347
    Weight, kg11.4
    Enclosure class, protectionIP23C
    Mains supply, V/Hz230 +/- 15% / 1ph 50/60
    Fuse, slow, A16
    Mains cable, Ø mm23x1.5
    Max output at 35% duty cycle, A150/20.5 
    Max output at 100% duty cycle, A100/19 
    Open circuit voltage, V60
    Power factor at max current0.99
    Setting range, A30-160 
    Wire feed, m/min2-11

  • Usable Wires

    Mild Steel 0.8mm - 5kg
    Cored Wire 0.8mm - 5kg





    Write a review

    Note: HTML is not translated!

    Rating Bad           Good