Renegade ET 300i Incl - 3m mains cable and plug, 5m return cable and clamp, 2m gas hose w.clips.
The Renegade TIG are inverter based high frequency TIG (HF) and MMA/Stick machines with extreme power to weight ratio. The compact format makes it easy to carry and bring to any jobsite. Combined with high duty cycle and the ability to run the machine on long mains and welding cable makes this superior welding machine for both on and off site applications.
The machine has an automatic input voltage sensor and can operate with any input voltage between 208V and 528V in 3 phase and 230V in single phase.
Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments.
Designed for extreme conditions including +55 Celsius ambient temperature.
Widest input voltage tolerance and ability to run on single and three phase with cables up to 100 meters.
Easy to read and quick to set panel increasing the accuracy and reduces the down time.
Non pulsed machine.
Modular system with tool-less connection to water cooler and trolley.
Primary Voltage 1 ph 230 VAC +/- 10%, 50/60 Hz
Primary Voltage 3 ph 230-480 VAC +/- 10%. 50/60Hz
Fuse slow 16 A at 400 V
Energy save mode 88 W at 400 V
Maximum Output 300A
Power factor at max current 0.96
Efficiency at max current TIG/MMA 88% / 84%
Open circuit voltage with/without VRD 33 V / 48 V
TIG welding Output -
40% - 300A / 22.0 V
60% - 250A / 20.0 V
100% - 200A / 18.0 V
MMA welding Output -
40% - 300A / 32.0 V
60% - 250A / 30.0 V
100% - 200A / 28.0 V
Current range 5-300 A (TIG and MMA)
Approvals/ Application class - Protection class CE / S / IP23
Mains cable 3m, 4x2.5mm2 (4x4mm2 with 230 V)
Supply plug CEE 16A
Dimensions, Lx W x H 460 x 200 x 320mm
The following items are available as optional extras :-