All Products

Aluminium Oxide Roll 25 x 25mm 60Grit..

Genuine Binzel MB15 EVO air cooled MIG torch.Can take MIG wire from 0.6 to 1.2mm.Swivel knuckle design gives optimum handling in every position.Fitted with euro connector.Air cooled to 180ADuty cycle 60%@ 150A...

Genuine Binzel MB25 EVO air cooled MIG torch.Can take MIG wire from 0.8 to 1.2mm.Swivel knuckle design gives optimum handling in every position.Fitted with euro connector.Air cooled to 270ADuty cycle 60%@ 230A...

 Binzel TIG Welding Torch 12.5ft - Type 18 Flexi..

Capacitor Discharge Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process. The stud flange is designed according to EN ISO 13918...

2.0 Focal PowerWelding Helmet Magnifier Plastic Lens Plate (Cheater Plate, Mag Lens)Helpful accessory that fits inside the welding helmet/shield/mask/hood.Magnifies the work area for easier and more accurate welds.Compatible with most screens including both standard dark glass and auto-darkening shi..

Replacement filter cover to suit ESAB EPR-X1 PAPR unit..

Complete replacement headband assembly to fit the ESAB F20, G30, G40 and G50 welding helmets and air versions Supplied ready fitted with sweat-band, helmet securing knobs & rake adjuster plate...

The ESAB NDT testing should be used to identify cracks in a weld. The process consists of 6 steps and to perform the test a cleaner, penetrant and a developer is required. The procedure should be as follows:1. Use ESAB cleaner and wipe dry.2. Spray ESAB penetrant, leave for 15 minutes.3. Wipe away t..

Replacement amber outer lens suitable for ESAB A50 & A60 Sentinel helmets..

7-9mm (5/16") O-Clip..

High quality MIG gauntletDouble Kevlar stitchedReinforced palm and thumb    Size 10BS EN 388:2003BS EN 12477:2001..