Argon 15 Welding Gas - 20 LTR (Refill)

FOR COLLECTION ONLY.

This three component mixture designed for maximum performance and ease of use giving it a high welder acceptance so reducing the instances of weld defects. Ideal for semi automatic, automatic and robotic applications, the gas produces smooth flat welds with a good penetration and sidewallfusion as well as low spatter, reducing the need for rework and increasing productivity. Welding speeds are high over a wide range of welding conditions making it the first choice product when productivity and low levels of distortion important.

Advantages:

• Produces a still arc with a broad heat flow. Low spatter and a good penetration profile make it a excellent choice for quality and economy in general engineering applications.
• Provides good welding performance     across a wide range of application and welding parameters.
• Wide operating envelope makes it easier to set welding conditions when mig welding.
• Produces minimal spatter, keeping welding nozzles cleaner.

Applications:

• Specially formulated for MIG welding sheet and thin sections of sheet and thin sections of steel between 2mm and 12mm thick.
• Can be used on mild steel sections thinner than 2mm and thicker than 12mm, but care must be taken to ensure the weld integrity is not compromised.
• Can be used in a wide range of applications from light to medium plate fabrication, structural steel work, bridge work, vehicle manufacture and general fabrications.
• Ideal for dip, pulse and spray transfer applications.
• Suitable for pipe and tube joining, can be used in all welding positions.
• Can be used in manual, robotic and automatic applications where clean nozzles reduce down time and provide cost-efficiencies.

Fabrications:

• (MIG) Carbon steel.

Technical Data:

• Cylinder ID code - GU20
• Gas code: 102
• Water Capacity - 10 Litres
• Approx height - 900mm
• Approx diameter - 204mm
• Approx gross weight - 30kg
• Approx nominal contents - 4,4m3
• Approx fill pressure 200bar - 2900psi.
• Outlet valve - BS No,3: 5/8" BSP RH INT Valve.