Esab OK 61.30 308L Stainless Steel Welding Rod 2.5 x 300mm (0.7kg)

Extra-low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. Also suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. Test certification available on request. Supplied in 0.7KG vacuum packet with approx 37 rods. 300mm long.

Welding current
DC+, AC OCV 50 V

Classifications	Approvals	Typical all weld metal composition, %	Typical mech. properties all weld metal
EN 1600 E 19 9 L R 1 2 SFA/AWS A5.4 E308L-17 Werkstoff Nr. 1.4316 CSA W48 E 308L-17	ABS Stainless CWB CSA W48 DB 30.039.02 DNV 308L Sepros UNA 272580 VdTÜV 00792 CE EN 13479	C <0,03 Si 0,75 Mn 0,9 Cr 19,5 Ni 10,0 Mo <0,5 Cu <0,5	Yield stress, MPa 430 Tensile strength, MPa 560 Elongation, % 43 Elongation, % 43 Ferrite content FN 3-10 Charpy V Test temps, °C Impact values, J +20 70 -60 32

Redrying temperature, °C 350 Redrying time, hours 2 Recovery 105

Diameter, mm	1,6	2,0	2,5	3,2	4,0	5,0
Length, mm	300	300	300	350	350	350
Arc voltage, V	27	29	31	31	32	33
Welding current, A	35-45	35-65	50-90	70-130	90-180	140-250
N. Kg weld metal/kg electrodes	0,55	0,55	0,55	0,60	0,60	0,60
B. No. of electrodes/kg weld metal	240	160	99	49	33	20
H. Kg weld metal/hour arc time	0,6	0,8	1,1	1,4	2,0	3,0
T. Burn-off time, s/electrode	24	29	36	54	60	60